Catia Pro - Realistic Rendering Course
Realistic Rendering Course
1- 47 fully illustrated tutorials (Video and Audio Narrations) with more than 3.4 Hours of viewing time.
2- Shows all possible details, from very beginning to advanced level.
3- Academic Learning Style. Demonstrating every mouse click along the way, and using class room training methods.
4- Goes through every subject, and shows every possible practical tips and design aspects.
5- Courses Covered:
§ Real Time Rendering
§ Photo Studio
§ Photo Studio Optimizer
Following Is a Complete List of The Tutorials (all are presented in Video + Audio Narrations)

1- Real Time Rendering
1-1 Quick Course
1- Applying Materials And Quick Introduction

1-2 Detailed Course
1-2-1 Material
1- Applying a Material
2- Modifying Material Lighting Properties
3- Modifying Material Texture Properties
4- Copying Material Rendering Parameters
5- Replacing a Material Link
6- Finding Materials
7- Copying And Pasting Materials Using Paste And Paste Special
8- Defining Reflection Settings
9- Activating And Deactivating Material Reflections
10- Setting Priority Between a Part and a Product

1-2-2 Light Source, Camera
And Views
1- Creating a Camera And Using the Camera Commands Toolbar
2- Editing the View Angle
3- Creating a Multi-View
4-1 Creating a Light Source
4-2 Adjusting Light Source Parameters
4-3 Using the Light Commands Toolbar
4-4 Creating Real Time Shadows
4-5 Creating Object-to-Object Shadow

1-2-3 Animation, Environment, Stickers And Managements
1- Stickers
2-1 Creating a Turntable And Create Basic Simulation
2-2 Animating Scene Elements in a Simulation
2-3 Using the Player
2-4 Generating a Video
3-1 Creating a Standard Environment
3-2 Creating a One-Face Sphere Environment
3-3 Defining the Wallpaper
3-4 Configuration Of Environment Reflections
3-5 Browsing the Scene Catalogue
3-6 Browsing the Scene Catalogue
4- Work on Materials and Materials Family
5- Sending Material Texture Images

2- Photo Studio
1- Entering The Photo Studio Workbench
2- Creating an Area Light Source
3- Using Render Shooting
4- Using Render Shooting And Managing the Environment
5- Setting The Parameters To Create Shooting
6- Defining a Scene
7-1 Tuning Scene (Light Sources)
7-2 Tuning Scene (Materials)

3- Photo Studio Optimizer
1- Basic Example
2- Creating Global Illumination
3- Creating Caustics
4- Using Depth of Field
5- Applying a Glow Effect
6- Creating a Cartoon Effect
7- The 3D Textures

Yabancı bir siteden alıntıdır


yavaş upload edıyorum likler geç gele bilir

http://hotfile.com/dl/31262481/48c2015/Realistic_Rendering.part1.rar.
htmlhttp://hotfile.com/dl/31262941/78eec4a/Realistic_Rendering.part2.rar.html
http://hotfile.com/dl/31262440/b6a2454/Realistic_Rendering.part3.rar.html
http://hotfile.com/dl/31262346/ddd752e/Realistic_Rendering.part4.rar.html
http://hotfile.com/dl/31262731/1c474ab/Realistic_Rendering.part5.rar.html
linkleri yenileme şansım yok ona göre

Catia Analiz Eğitim Videoları
İÇERİK:
1- 127 fully illustrated tutorials (Video and Audio Narrations) with more than 5.0 Hours of viewing time.

2- Shows all possible details, from very beginning to advanced level.

3- Academic Learning Style. Demonstrating every mouse click along the way, and using class room training methods.

4- Goes through every subject, and shows every possible practical tips and design aspects.

5- Courses Covered: Structure Analysis Workbench.

Following Is a Complete List of The Tutorials (all are presented in Video + Audio Narrations)


1- First: Quick Course
1- Entering the Generative Structural Analysis Workbench And Quick Introduction

2- Second: Detailed Course
4-2-1 Creating (Processing)
2-1-1 Inserting Analysis Cases
1- Inserting a New Static Case
2- Inserting a New Static Constrained Case
3- Inserting a New Frequency Case
4- Inserting a New Buckling Case
5- Inserting a New Combined Case
6- Inserting a New Envelop Case
7- Inserting a Harmonic Dynamic Response Case
8- Inserting a Transient Dynamic Response Case

2-1-2 Modulation And
Dynamic Response Sets
1-1 Creating White Noise Modulation
1-2 Importing Frequency and time Modulation
2-1 Defining a Load Excitation Set
2-2 Defining a Restraint Excitation Set
2-3 Defining a Damping Set

2-1-3 Model Manager
And Adaptivity
1-1 Creating 3D Mesh Parts
1-2 Creating 2D Mesh Parts
1-3 Creating 1D Mesh Parts
1-4 Creating Local Mesh Sizes
1-5 Creating Local Mesh Sags
1-6 Creating 3D Properties
1-7 Creating 2D Properties
1-8 Importing Composite Properties
1-9 Creating 1D Properties
1-10 Creating Mapping Properties
1-11 Changing Element Type
1-12 Creating a User Material
1-13 Applying a Material to Analysis Connections
1-14 Modifying Material Physical Properties
1-15 Editing a User Isotropic Material
1-16 Checking the Model
2-1 Creating Global Adaptivity Specifications
2-2 Creating Local Adaptivity Specifications
2-3 Computing with Adaptivity

2-1-4 Connections
2-1-4-1 Analysis Connections
1- General Analysis Connection
2- Point Analysis Connection
3- Point Analysis Connection Within One Part
4- Line Analysis Connection
5- Line Analysis Connection Within One Part
6- Surface Analysis Connection
7- Surface Analysis Connection Within One Part
8- Points to Points Analysis Connection
9- Point Analysis Interface

2-1-4-2 Creating Face To Face
Connection Properties
1- Creating Slider Connection Properties
2- Creating Contact Connection Properties
3- Creating Fastened Connection Properties
4- Creating Fastened Spring Connection Properties
5- Creating Pressure Fitting Connection Properties
6- Creating Bolt Tightening Connection Properties

2-1-4-3 Creating Distant
Connection Properties
1- Creating Rigid Connection Properties
2- Creating Smooth Connection Properties
3- Creating Virtual Rigid Bolt Tightening Connection Properties
4- Creating Virtual Spring Bolt Tightening Connection Properties
5- Creating User-Defined Connection Properties

2-1-4-4 Creating Welding And Point
Based Connection Properties
1-1 Creating Spot Welding Connection Properties
1-2 Creating Seam Welding Connection Properties
1-3 Creating Surface Welding Connection Properties
2-1 Creating Nodes to Nodes Connection Properties
2-2 Creating Node Interface Properties


2-1-5 Virtual Parts, Masses
And Restraints
2-1-5-1 Virtual Parts
1- Creating Rigid Virtual Parts
2- Creating Smooth Virtual Parts
3- Creating Contact Virtual Parts
4- Creating Rigid Spring Virtual Parts
5- Creating Smooth Spring Virtual Parts
6- Creating Periodicity Conditions

2-1-5-2 Mass Equipments
1- Creating Distributed Masses
2- Creating Line Mass Densities
3- Creating Surface Mass Densities
4- Inertia on Virtual Part

2-1-5-3 Restraints
1- Creating Clamps
2- Creating Surface Sliders
3- Creating Ball Joins
4- Creating Sliders
5- Creating Pivots
6- Creating Sliding Pivots
7- Creating User-defined Restraints
8- Creating Iso-static Restraints

2-1-6 Loads
2-1-6-1 Forces
1- Creating Pressures
2- Creating Distributed Forces
3- Creating Moments
4- Creating a Bearing Load
5- Importing Forces
6- Importing Moments

2-1-6-2 Force Densities
1- Creating Line Force Densities
2- Creating Surface Force Densities
3- Creating Volume Force Densities
4- Creating Force Density

2-1-6-3 Body Motion, Displacements And Temperature
1-1 Creating Accelerations
1-2 Creating Rotation Forces
2- Creating Enforced Displacements
3- Temperature

2-2 Results (Post-Processing)
2-2-1 Creating Groups
1- Grouping (Points-Lines-Surfaces-Bodies-BOX and Sphere)
2- Grouping (Points-Lines-Surfaces) by Neighbourhood
3- Creating Groups under a Mesh Part
4- Analyze Group

2-2-2 Envelop Case Sets
And Sensors
1-1 Defining an Envelop Set
1-2 Adding Envelop Types
1-3 Editing an Envelop Type
2-1 Creating Global Sensors
2-2 Creating Local Sensors
2-3 Creating Reaction Sensors

2-2-3 Results Computation
1- Permanent and Temporary External Storage
2- Computing Objects Sets
3- Computing Static Constrained Solutions
4- Computing Buckling Solutions
5- Computing Envelop Solutions
6- Computing Harmonic Dynamic Response Solutions
7- Computing Transient Dynamic Response Solutions

2-2-4 Results Visualization
1- Visualizing Deformations
2- Visualizing Von Mises Stresses
3- Visualizing Displacements
4- Visualizing Principal Stresses
5- Visualizing Precisions
6- Generating Reports
7- Reading a Historic of Computation
8- Elfini Solver Log
9- Animating Images
10- Cut Plane Analysis
11- Amplification Magnitude
12- Creating Extrema
13- Editing the Colour Palette
14- Images Layout
15- Simplifying Representation
16- Generating Images

2-2-5 Generating 2D Display
1- Generating a 2D Display for Modulation
2- Generating a 2D Display for Dynamic Response Solution
3- Generating a 2D Display for Sensor
4- Editing 2D Display Parameters

Whatever your experience is; with this course, we let CATIA to be your first tool to work on any project, whether it is an entry level or state-of-the-art design.

You can register your training course whenever you want. There will be no time limit for the registered package. Registration fee: 10 GBP only.

No need to create your own backup. You can order extra original DVD for backup. We produce our courses on premium DVD’s brand
http://hotfile.com/dl/31266146/7ce1c67/Structure_Analysis.part01.rar.html
http://hotfile.com/dl/31266338/efa908f/Structure_Analysis.part02.rar.html
http://hotfile.com/dl/31266157/d59c44c/Structure_Analysis.part03.rar.html
http://hotfile.com/dl/31266360/20d81eb/Structure_Analysis.part04.rar.html
http://hotfile.com/dl/31266244/86b48ac/Structure_Analysis.part05.rar.html
http://hotfile.com/dl/31266530/9cac167/Structure_Analysis.part06.rar.html
http://hotfile.com/dl/31266122/7c76f63/Structure_Analysis.part07.rar.html
http://hotfile.com/dl/31266286/e8db218/Structure_Analysis.part08.rar.html

Catia Görsel Eğitim Videoları

1- Sketcher And Constraints
1-1 Introduction
1- General Concept
2-1 Catia Desktop
2-2 Catia Desktop
3- Selection And Entering Values In Catia
4- How To Set The Configuration In Catia
5- Practical Ways To Manipulate The View

1-2 Creating Geometries
1- Creating a Line
2-Creating an Infinite Line
3-Creating a Bi-Tangent Line
4-Creating a Bisecting Line
5-Creating a Line Normal to a Curve
6-Creating an Axis
7-Creating Points
8- Creating Equidistant Points
9- Creating Points Using Intersection
10-Creating a Point Using Projection
11-Creating Associative Projected Points
12- Creating Profiles
13-Creating Circles
14-Creating Three Points Circles
15-Creating Circles Using Coordinates
16-Creating a Tri-Tangent Circle
17-Creating Arcs
18-Creating Three Points Arcs
19-Creating Three Points Arcs Using Limits
20- Creating a Spline
21-Connecting Curves with a Spline
22-Connecting Curves with an Arc
23- Creating Ellipses
24-Creating a Parabola by Focus
25-Creating a Hyperbola by Focus
26-Creating Conic Curves
27- Creating Rectangles
28- Creating Oriented Rectangles
29- Creating Parallelograms
30- Creating Elongated Holes
31-Creating Cylindrical Elongated Holes
32-Creating Keyhole Profiles
33-Creating Hexagons
34-Creating Centred Rectangles
35-Creating Centred Parallelograms

1-3 Operations
1- Creating Corners
2- Creating Chamfers
3- Trimming Elements
4- Breaking And Trimming
5-Closing Elements And Complementing An Arc, Circle or Ellipse
6-Breaking Elements
7-Creating Mirrored And Moving Elements by Symmetry
8- Translating Elements
9- Rotating Elements
10- Scaling Elements
11 (A) Offsetting 2D Geometry
11 (B) Offsetting Using offset tools
11 (C) Offsetting- Creating Spline Offsets
12 (A) Using 3D Geometry- Projecting 3D Elements onto the Sketch Plane
12 (B) Projecting 3D Silhouette Edges
12 (C) Intersecting 3D Elements with the Sketch Plane
13 (A) Copying, pasting elements with H And V constraints on their absolute axis
13 (B) Copying Sketches
14-Replacing Geometry
15-Editing Parents, Children And Constraints
16- Performing Auto-Search on Profiles
17-Transforming Profiles
18-Deactivating a Sketch

1-4 Constrains
1- Geometrical Constraint
2- Dimensional constraint
3- Creating Constraints Using the Constraints Toolbar
4- Creating Constraints via a Dialog Box
5- Modifying The Constraints
6- Auto-Constraining a Group of Elements
7- Solving Design Problem Using Fix Together
8- Animating Constraints
9- Edit Multi-Constraint
10- Using the Sketch Solving Status
11- Defining Constraint Measure Direction
12- Creating Contact Constraints
13- Modifying Constraints
14- Modifying Constraints Using Shift Key

1-5 Design Aspects
1-1 Sketching from an Existing Part
1-2 Sketching from an Existing Part
1-3 Sketching from an Existing Part
2- Using Sketch Tools
3- Using Visualization Toolbar
4- Using Smart Pick
5- Language Of Colours In Catia
6- Setting the Datum Mode
7-1 Performing A Quick Geometry Diagnosis
7-2 Analyzing the Sketch
8-1 Creating Output Features
8-2 Creating Profile Features
9- Creating Accelerators
10- Restoring the Toolbars Positions
11- About The Standard And Construction Elements
12- Sketch Detection


2- Part Design
2-1 Creating
1-2-1-1 Sketch Based Features
1- Entering The Part Design Workbench
2 (A) Creating Pads
2 (B) Creating Pads
2 (C) Creating Pads
2 (D) Creating Pads
2 (E) Creating Pads
2 (F) Creating Pads
2 (G) Creating Pads
2 (H) Creating Pads
2 (I) Creating Pads
3- Creating Multi Pads
4- Creating Drafted Filleted pad
5- Creating Pockets
6- Creating Multi Pockets
7-Creating Drafted Filleted Pockets
8- Creating Shafts
9- Creating Grooves
10 (A) Creating Holes
10 (B) Creating Holes
10 (C) Creating Holes
11- Creating Rib
12- Creating Slots
13- Creating Stiffener
14- Creating Multi sections solid
15- Creating Removed Multi-sections
16- Creating Solid Combine



2-1-2 Dress-Up Feature
1 (A) Creating Edge Fillet
1 (B) Creating Edge Fillet
2- Creating Variable Radius Fillet
3- Reshaping The Corner Using Blend Corner
4 (A) Creating Face Fillet
4 (B) Creating Face Fillet using Hold Curve
4 (C) when Creating Face Fillet Is Not Working
5- Creating Tri-tangent Fillet
6- Creating Chamfer
7 (A) Creating Basic Draft
7 (B) Creating Variable Angles Draft
7 (C) Creating Advanced Draft
7 (D) Creating Drafts with Parting elements
7 (E) Creating Drafts From reflect lines
8- Creating Shells
9- Creating Thickness
10- Creating Threads And Taps
11- Creating Remove Face Features
12- Creating Replace Face Features

2-1-3 Surface Based Feature
1- Creating Splits
2- Creating Thick Surfaces
3- Creating Close Surface Features
4- Creating Sew Surfaces

2-1-4 Reference Elements
1 (A) Creating 3D Points
1 (B) Creating 3D Points
1 (C) Creating 3D Points
1 (D) Creating 3D Points
2 (A) Creating 3D Line
2 (B) Creating 3D Line
2 (C) Creating 3D Line
2 (D) Creating 3D Line
3- Creating Planes

2-1-5 Using Surfaces And Curves
And Solving Cad Problems
1 (A) Joining Surfaces or Curves
1 (B) Joining Surfaces or Curves
2- Extrapolating Surfaces
3- Extracting Geometry
4- Creating Intersections
5- Creating Projection
6- Creating Boundary Curves


2-2 Operations
2-2-1 Boolean Operations
1- Assembling Bodies
2- Intersecting Bodies
3- Adding Bodies
4- Removing Bodies
5- Union Trim Bodies
6- Remove Lump (Keeping and Removing Faces)
7- Changing a Boolean Operation into Another One

2-2-2 Modifying And Manipulation
1- Creating Translations
2- Creating Rotations
3- Symmetry
4- Mirror
5- Creating Rectangular Patterns
6 (A) Creating Circular Patterns
6 (B) Creating Circular Patterns
7- Creating User Patterns
8- Exploding Patterns
9- Creating Scaling

2-3 Constraints
1- Setting 3D Constraints
2- Setting Constraints Defined in Dialog Box
3- Computing Mean Dimensions
4- Modifying Constraints

2-4 Design Aspects
2-4-1 Design Aspects (First Level)
1- Redefining Feature Parameters
2 (A) Updating Parts
2 (B) Updating Parts
3 (A) Deleting Features
3 (B) Optimizing The Design By Recognizing The Non Useful Elements
4- Deactivating Elements
5 (A) Reordering One Feature
5 (B) Reordering Several Features
6 (A) Replacing or Moving Elements
6 (B) Replacing a Body
7- Changing a Sketch Support
8 (A) Displaying And Editing The part Properties
8 (B) Displaying And Editing Bodies Properties
8 (C) Displaying And Editing Features Properties

2-4-2 Design Aspects (Second Level)
1- Cut Copy Paste
2- Editing a List of Elements
3- Scanning a Part and Defining In Work Objects
4- Performing a Draft Analysis
5- Isolating Geometric Elements
6- Displaying Parents And Children

2-4-3 Design Aspects (Third Level)
1- Opening a New CATPart Document
2- Hybrid Design
3- Defining an Axis System
4- Publishing Elements
5-1 Inserting a New Body
5-2 Inserting Features into a New Body
6-1 Geometrical sets
6-2 Inserting a Geometrical Set
6-3 Moving Elements of a Geometrical Set To New Body
7-1 Inserting an Ordered Geometrical Set
7-2 Modify Children command
7-3 Editing Features Within an Ordered Geometrical Set
8-1 Creating Power Copies
8-2 Instantiating Power Copies
8-3 Instantiating Power Copies Using Step By Step Instantiation
8-4 Instantiating Power Copies Using Part Comparison Instantiation
8-5 Saving Power Copies into a Catalogue

2-4-4 Design Aspects (Fourth Level)
1-How to Improve Update Operations
2-How to Improve Performances when Editing
3-How to Improve Performances when Using the Pre-selection Navigator
4-How to Reduce Data Size when Positioning Pasted Bodies

2-5 Projects
1- Project (Creating Part-1)
2- Project (Creating Part-2)
3- Project (Creating Part-3)
4- Project (Assembling Parts)
5- Project (Golden Rules)

3- WireFrame And Surface Design
3-1 Creating
3-1-1 Creating Wire-frame Geometries
1 (A) Integrating PD And WF, And Utilizing Working On Support
1 (B) The First Step In Preparing Oriented And Flexible Design
2 (A) Creating Multiple Points and planes
2 (B) Creating Planes Between Other Planes
3- Creating an Axis
4- Creating Polylines
5- Creating Circles
6- Creating Splines
7- Creating a Helix
8- Creating Corners
9- Creating Connect Curves
10- Creating Projections

3-1-2 Creating Surface Geometries
1- Creating Extruded Surfaces
2- Creating Revolution Surfaces
3- Creating Spherical Surfaces
4- Creating Cylindrical Surfaces
5- Creating Offset Surfaces
6- Creating Filling Surfaces
7- Creating Swept Surfaces
8- Creating Multi-Sections Surfaces
9- Creating Blended Surfaces

3-2 Operations And Manipulations
3-2-1 Performing Operations on
Shape Geometry
1 (A) Joining Surfaces or Curves
1 (B) Joining Surfaces or Curves And solving The design’s problems
2- Healing Geometry
3- Restoring a Surface
4- Disassembling Elements
5- Splitting Geometry
6- Trimming Geometry
7- Rotating Geometry
8- Translating Geometry
9- Performing Symmetry on Geometry
10- Transforming Geometry by Scaling
11- Transforming Geometry by Affinity
12- Transforming Elements From an Axis to Another
13- Inverting the Orientation of Geometry
14- Creating the Nearest Entity of a Multiple Element
15- Extrapolating Curves

3-2-2 Editing Surface and
Wireframe Geometries
1- Editing Surface and Wireframe Definitions
2- The Implicit And Explicit Modifications
3- Deleting Surfaces and Wireframe
4 (A) Developing Wires and Points
4 (B) Unfolding a Surface

3-3 Using Tools
1- Quick Selection of Geometry
2- Keeping the Initial Element
3- Checking Connections Between Surfaces
4- Checking Connections Between Curves
5- Analyzing Distances Between Two Sets of Elements
6- Performing a Surface Curvature analysis
7- Performing a Curvature Analysis

http://hotfile.com/dl/29958820/43c2d45/CP_CPC.part01.rar.html
http://hotfile.com/dl/29958818/2cdf968/CP_CPC.part02.rar.html
http://hotfile.com/dl/29958819/f8ac1eb/CP_CPC.part03.rar.html
http://hotfile.com/dl/29958822/a2b0b99/CP_CPC.part04.rar.html
http://hotfile.com/dl/29958821/884d4ee/CP_CPC.part05.rar.html
http://hotfile.com/dl/29960249/c24452a/CP_CPC.part06.rar.html
http://hotfile.com/dl/29960252/0644567/CP_CPC.part07.rar.html
http://hotfile.com/dl/29960447/a8c9695/CP_CPC.part08.rar.html
http://hotfile.com/dl/29960456/3339742/CP_CPC.part09.rar.html
http://hotfile.com/dl/29960490/c7b26aa/CP_CPC.part10.rar.html
http://hotfile.com/dl/29961261/cbef377/CP_CPC.part11.rar.html
http://hotfile.com/dl/29961414/445beae/CP_CPC.part12.rar.html
http://hotfile.com/dl/29961446/434ad76/CP_CPC.part13.rar.html
http://hotfile.com/dl/29961526/bfda26d/CP_CPC.part14.rar.html
http://hotfile.com/dl/29961535/a55ee66/CP_CPC.part15.rar.html
http://hotfile.com/dl/29962636/8889165/CP_CPC.part16.rar.html
http://hotfile.com/dl/29962683/95b4c08/CP_CPC.part17.rar.html
http://hotfile.com/dl/29962693/ee9d656/CP_CPC.part18.rar.html
http://hotfile.com/dl/29962815/9f5489e/CP_CPC.part19.rar.html
http://hotfile.com/dl/29962840/a07fda1/CP_CPC.part20.rar.html
http://hotfile.com/dl/29963423/c22358c/CP_CPC.part21.rar.html
http://hotfile.com/dl/29963466/3b6e71d/CP_CPC.part22.rar.html
http://hotfile.com/dl/29963473/8bdeb90/CP_CPC.part23.rar.html
http://hotfile.com/dl/29963506/1db5024/CP_CPC.part24.rar.html
http://hotfile.com/dl/29963515/c938681/CP_CPC.part25.rar.html
http://hotfile.com/dl/29963947/a1d0c64/CP_CPC.part26.rar.html
http://hotfile.com/dl/29964076/cbcd072/CP_CPC.part27.rar.html
http://hotfile.com/dl/29964088/b0a1dc5/CP_CPC.part28.rar.html

Catia Pro-Drafting Görsel eğitim videoları

Video içeriği:
* Generative Drafting
* Interactive Drafting
http://hotfile.com/dl/31231101/b45a30d/Drafting.part01.rar.html
http://hotfile.com/dl/31231282/eee486d/Drafting.part02.rar.html
http://hotfile.com/dl/31231551/ce25c80/Drafting.part03.rar.html
http://hotfile.com/dl/31231068/ffad209/Drafting.part04.rar.html
http://hotfile.com/dl/31231233/bd665e8/Drafting.part05.rar.html
http://hotfile.com/dl/31231412/48327aa/Drafting.part06.rar.html
http://hotfile.com/dl/31231276/2f22aff/Drafting.part07.rar.html
http://hotfile.com/dl/31231558/d89f120/Drafting.part08.rar.html
http://hotfile.com/dl/31231660/d1c7777/Drafting.part09.rar.html

Catia Pro - Products and Assembly Design Course

119 fully illustrated tutorials (Video and Audio Narrations) with more than 6.0 Hours of viewing time.

Shows all possible details, from very beginning to advanced level.

Academic Learning Style. Demonstrating every mouse click along the way, and using class room training methods.

Goes through every subject, and shows every possible practical tips and design aspects.

Courses Covered:

* Product Structure
* Assembly Design

- iNSTALL NOTES -

Install and copy overwrite catia2.exe in Crack folder to
Program FilesCatia ProMCEMCE-Products and Assembly Design
http://hotfile.com/dl/29955671/5284eeb/CP_PAADC.part01.rar.html
http://hotfile.com/dl/29955672/18d47c7/CP_PAADC.part02.rar.html
http://hotfile.com/dl/29955673/4f86ee3/CP_PAADC.part03.rar.html
http://hotfile.com/dl/29955675/571f049/CP_PAADC.part04.rar.html
http://hotfile.com/dl/29955674/cd9d4d1/CP_PAADC.part05.rar.html
http://hotfile.com/dl/29956094/5ba494f/CP_PAADC.part06.rar.html
http://hotfile.com/dl/29956103/5160496/CP_PAADC.part07.rar.html
http://hotfile.com/dl/29956105/6cebef8/CP_PAADC.part08.rar.html
http://hotfile.com/dl/29956107/0b9a7d9/CP_PAADC.part09.rar.html
http://hotfile.com/dl/29956111/af1b8d5/CP_PAADC.part10.rar.html
http://hotfile.com/dl/29956465/abd0f9d/CP_PAADC.part11.rar.html
http://hotfile.com/dl/29956475/bb79b3e/CP_PAADC.part12.rar.html
http://hotfile.com/dl/29956482/4debd81/CP_PAADC.part13.rar.html
http://hotfile.com/dl/29956483/51439b0/CP_PAADC.part14.rar.html
http://hotfile.com/dl/29956494/0d9da67/CP_PAADC.part15.rar.html
http://hotfile.com/dl/29956852/cd51569/CP_PAADC.part16.rar.html
http://hotfile.com/dl/29956871/2a8f34d/CP_PAADC.part17.rar.html

Catia gibi kapsamlı bir programın fazla dökümanı yok..

Eminim bir çok kişi kaçırmayacaktır.

evet bunları bende indiriyorum bir kısmı bitti allaha şukur içerisinden program çıkıyor bu programı kurdukdan sonra crack yapıyoruz içerisinde var movie klasörünü program files içerisindeki catia pro içerisine kopyalıyoruz program çalıştırıp videolar karşımız da gerçekden muthış bir kaynak catia v5 anlatıyor hemde profosyonel olarak

holl
shell
rib
circular
thickness
pocet
shaft
fillet
Chamfer
draft
groove komutları ve
3 adet örnek parça çizimi ile bir adet montaj
videoları mevcuttur.

ŞİFRE RAR DOSYASININ İÇİNDEDİR YANSA GÖZÜKÜR
http://rapidshare.com/files/20464545/dosyalar.rar.html

catia animasyon komutları
1) Revoult
avi ve part dosyaları biçiminde.
http://rapidshare.com/files/59652099/Desktop.zip.html
2) Rackjoint tekeri zeminde döndürme
http://rapidshare.com/files/61889163/rack_joint_zeminde_teker_doenduerme.rar.html
3) Prizmatik Joint kızak hareketi.
http://rapidshare.com/files/61891614/k__305_zak_hareketi_prizmatik_joint.rar.html
4) Bu üç komutunda kullanıldığı piston krank silindir çalışması animasyonu
http://rapidshare.com/files/61886282/piston_animasyon.rar.html
5) Kam Mili ve Subap çevirme komutları
http://rapidshare.com/files/61901122/kam_animasyon.rar.html
6) Revoultjoint dişli döndürme.
http://rapidshare.com/files/61905732/revoultjoint_di__351_li_doenduerme.rar.html
7) Slide curve joint.
http://www.filefactory.com/file/e0e3fa/
8)Screwjoint komutu
http://rapidshare.com/files/99595437/screwjoint.rar.html
9)Roolcurve bilya döndürme videosu
http://www.filefactory.com/file/db54fd/
10)zamanlama
http://rapidshare.com/files/104222428/zamanlama_render.rar.html

2.5 GB lik çok büyük bir arsiv mutlaka öneririm

Kaynak ingilizcedir...
http://rapidshare.com/files/203101187/Catia_V5_Tutorial_.part01.rar
http://rapidshare.com/files/203101151/Catia_V5_Tutorial_.part02.rar
http://rapidshare.com/files/203101148/Catia_V5_Tutorial_.part03.rar
http://rapidshare.com/files/203101434/Catia_V5_Tutorial_.part04.rar
http://rapidshare.com/files/203101502/Catia_V5_Tutorial_.part05.rar
http://rapidshare.com/files/203101583/Catia_V5_Tutorial_.part06.rar
http://rapidshare.com/files/203101303/Catia_V5_Tutorial_.part07.rar
http://rapidshare.com/files/203101318/Catia_V5_Tutorial_.part08.rar
http://rapidshare.com/files/203101301/Catia_V5_Tutorial_.part09.rar
http://rapidshare.com/files/203101482/Catia_V5_Tutorial_.part10.rar
http://rapidshare.com/files/203101142/Catia_V5_Tutorial_.part11.rar
http://rapidshare.com/files/203100878/Catia_V5_Tutorial_.part12.rar